Smart Door Operator Bus
The Project
"We created a prototype specifically designed for bus stops. We connected the distance sensor to Raspberry Pi. This sensor identifies individuals standing inside the bus door. When the door is closed, the servo motor becomes active, rotating 90 degrees. Additionally, an LED light turns on to inform the bus driver that the door is closed. We used the Python language to program the distance sensor. If anything obstructs the doors, the Raspberry Pi immediately sends a signal to the servo motor to rotate 90 degrees, automatically closing the door. The LED light indicates to the bus driver that the door is closed. "
Team Comments
We chose to make this project because...My friend boarded a crowded local bus and had to stand by the door, leading to him falling out of the bus and getting injured
What we found difficult and how we worked it outto find out which equipment is needed to solve this problem and after that how to connect with secncors and how to create program
Next time, we would..."We want to inform the people standing inside before the stop arrives that your stop is at a certain distance, so be ready."
About the team
Team members
More cool Community projects
How to make Password Door Lock
Hardware
About of solar system
Scratch
Humanity
Scratch